Need Assistance? 1.855.849.4328
Shipping $9.99 Flat Rate Shipping
Home > Dual Wall Adhesive Heat Shrink > 3:1 Dual Wall Adhesive Lined Professional Grade Heat Shrink

Dual Wall Adhesive Heat Shrink
3:1 Dual Wall Adhesive Lined Professional Grade Heat Shrink
What's special about this heat shrink tubing?
  • Fits over large connectors but can still shrink down to properly seal the cable.
  • Provides excellent strain relief.
  • High shrink ratio allows for a variety of different uses.
  • Passes UL VW-1, CSA OFT, -F- MARK for safety specifications.
  • Dual Wall heat shrink has an adhesive lining that melts when heated and dries after shrinking to create a tight seal to the cable or tubing

http://www.heatshrinksupplies.com3-1-dual--wall-adhesive-lined-professional-grade.html
$1.82
3:1 Dual Wall Adhesive Lined Professional Grade Heat Shrink

3:1 Dual Wall Adhesive Lined Professional Grade Heat Shrink

This 3:1 Adhesive Wall Heat Shrink Tubing is perfect for fitting over large connectors and shrinking down to make a proper seal on the cable.
What's special about this heat shrink tubing?
  • Fits over large connectors but can still shrink down to properly seal the cable.
  • Provides excellent strain relief.
  • High shrink ratio allows for a variety of different uses.
  • Passes UL VW-1, CSA OFT, -F- MARK for safety specifications.
  • Dual Wall heat shrink has an adhesive lining that melts when heated and dries after shrinking to create a tight seal to the cable or tubing
As Low As: $1.82 per Footpricing table below


Products
Features
Resources
Video
Part #
Nominal Size
BeforeAfter
BlackClearRedOrangeYellowGreenBlueVioletGreyWhiteLengthPrice/ft
HS3A-0125FT-BK1/8"0.04"$1.82 per ft
HS3A-025FT-BK1/4"0.08"$1.93 per ft
HS3A-0375FT-BK3/8"0.125"$3.32 per ft
HS3A-050FT-BK1/2"0.167"$4.13 per ft
HS3A-075FT-BK3/4"0.25"$4.28 per ft
HS3A-100FT-BK1"0.375"$7.65 per ft
HS3A-150FT-BK1.5"0.5"$16.26 per ft
  • High shrink ratio helps to seal and protect awkwardly-shaped objects with varying diameters
  • Flame retardant and heat resistant to protect cables against damage from high temperatures
  • Less than 10% shrinkage in the axial (lengthwise) direction, so you can better estimate the length of material you will need
  • Passes UL VW-1, CSA OFT, -F- MARK for safety specifications
  • Adhesive lining (included in the "dual wall" option) creates a tight seal between tubing and wires, so that the tubing won't shift or slide off
 

Adhesive Lined Tubing

The adhesive version of our 3:1 heat shrink features "dual-wall" design, which is made up of an outer polyolefin (heat shrink) tube lined with a interior coating of heat-activated adhesive. During application, as the outer tubing shrinks, the inner layer melts, flows, and then resets when cooled, helping the tubing to achieve a snug, moisture-resistant fit around wire harnesses, cables and connectors. We recommend it for applications that require strain relief, watertight seals, or wire color-coding (for example, to help identify positive and negative battery connections).

Shop With Confidence
We accept Visa, Master Card, American Express, Discover, and PayPal This shopping cart employs the highest industry strength security: 256 bit SSL
© 2012 HeatShrinkSupplies.com. All Rights Reserved. Yahoo! Store by Solid Cactus